China 600A 25 kV deadbreak Connecting Plug Manufacturers Factory Suppliers
-
15/24KV 600A Extended Bushing Tube
600A class bushing extender allow installation on standard de-energized 600A dead break interfaces for coupling reducing tap plugs, connecting plugs and apparatus bushings. 200A Load break interfaces for Elbow surge arrester and elbow connector. When assembled to mating apparatus, it provides a...Read More -
12/24KV 630A Separable T Connector
For connection of polymeric cable to transformers, switch gear, motors and other equipment with a pre-moulded separable connector.Read More -
15KV 200A Insulated Protective Cap
24kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible...Read More -
15KV 200A Bushing Well
15kV/24kV 200A Casing seat is widely used in the high-voltage circuit of the pad-mounted, submersible transformer, switch gears, etc. A load break bushing insert threads into a universal bushing well to provide the same function as an integral load break bushing. The bushing is used together...Read More -
15KV 200A Extended Insulated Bushing
15kV 200A Insulated Bushing Extenders designed for transformers, outdoor surrounding cable supply cabinet and switch cabinet. Insulated for the 200A outgoing line. 200A 15kV Insulated Bushing Extender connect with bushing insert, rotatable feed thru insert or surge arrester insert. The Bushing...Read More -
15KV 600A Specific Load Break Junction
200A/600A Shaped busbar provide two, three or four 200A load break and 600A dead break, 15kV mixed interfaces on one side that are internally bused together and meet all requirements of ANSI/IEEE 386-Separable Insulated Connector Systems. When mated with a comparably rated product, the junction...Read More -
24KV 600A Deadbreak T Connector
15kV/24kV 600A Class T Dead break Connector is used to terminate high voltage underground cable to transformers, switches, switchgear and other apparatus. It is fully shielded, submersible. Our Systems offers an exclusive optional capacitive test point similar to test points on 200A elbow...Read More -
15KV/24KV 600A Deadbreak Transition Plug
600A/200A Integral Dead break Bushing is used to convert a standard 600A dead break interface to a standard 200A load break interface. Used with a 200A insulated protective cap, M.O.V Elbow Arrester, Grounding Elbow or Load break Elbow Connector, A integral dead break bushing provides a fully...Read More -
24KV 250A Deadbreak Straight Connector
◆ Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.
◆ Built-in capacitive test point to determine the circuit status or install a fault indicator.
◆ No minimum phase clearance requirements.
◆ Mounting can be vertical, horizontal, or any angle in between.
Read More -
15KV/24KV 600A Doadbreak TT Connector
Connecting screw: tin-plated copper double-headed screw, and casing to ensure close coordination.Read More -
12/24KV 630A Separable Elbow Connector
630A European after connector can be use together with the T Fore connector and some other back connector, it can be provide more branches, and they can not together with the bushing directly, cover the back protection cap on the end of the blanking cover. Features: ◆ Provides a fully screened...Read More
Pipe Fittings (Stainless) / SS-5404 | NPTF Hex Pipe Nipple (Stainless) NPTF Hex Pipe Nipple This stainless steel pipe fitting is suitable for hydraulic applications as well as water and other...
NPTF Pipe Male Hex Nipple. 5404 NPTF Pipe are equivalent to the following: * SAE 140137 * Parker Hydraulics 0101 * Parker GG * Weatherhead C3069 * Aeroquip 2083. Available in...
5404 | Male Pipe Hex Nipple Please select a size below for more information. Nominal sizes shown below. To purchase, simply input a Qty and Check "Add". ... Part #: 5404-16-08 5404-16...
Amazon.com: HD 5404 | NPTF Male x NPTF Male Hydraulic Pipe Hex Nipple Adapter (5404-20-20 - 1-1/4" x 1-1/4") : Industrial & Scientific...
Material. Zinc Plated Steel. Male Thread. NPTF. Working Pressure. 1150 PSI. Male Thread Size. 1-1/4" - 11-1/2....
5404 - NPTF Pipe Male Hex Nipple / Connector 5404 NPTF Pipe are equivalent to the following: SAE 140137 Parker hydraulics 0101 Parker GG Weatherhead C3069 Aeroquip 2083 Prop 65...